loading
reading
writing
saving
searching
CleanFreak® 120 PSI Heated Carpet Extractor w/ 12" Wand & 25' Hose - $1,800 (Oakridge)
QR Code Link to This Post
This CleanFreak heated carpet extractor uses hot water and an adjustable glide wand to remove as much dirt from your carpets as mechanically possible. The hot water severs the bond between the dirt and the carpet fibers, allowing it to be recovered by the drag wand. The single jet wand has a #02 spray jet, and also has an adjustable glide that consistently recovers 30% more solution on each pass, no matter the angle. The wand does breakdown into 2 pieces via a button lock that snaps the two pieces into place for use. The solution line has a 1/8" quick disconnect fitting on it, so the wand does truly come fully apart into two separate pieces.
Not only do you get great recovery power with this extractor, but you also get unbelievable heat! The dual 1000 watt heaters will provide a maximum water temperature of 210° F. Between the heater, pump, and vacuum, you'll need to power the unit with electrical outlets on 2 separate circuit breakers. The machine itself has a built in circuit locator that will tell you if you're on 2 separate circuits or not. Simply press the circuit locator button when plugged into 2 separate outlets, and if the light turns on, you know you're good to start extracting. If not, you'll need to search for another outlet.